A base class for a class that receives notification callbacks from a sACN merge receiver. More...

#include <merge_receiver.h>

Public Member Functions
	NotifyHandler (const NotifyHandler &other)=default
	Defaulted copy constructor.

NotifyHandler &	operator= (const NotifyHandler &other)=default
	Defaulted copy assignment operator.

	NotifyHandler (NotifyHandler &&other)=default
	Defaulted move constructor.

NotifyHandler &	operator= (NotifyHandler &&other)=default
	Defaulted move assignment operator.

virtual void	HandleMergedData (Handle handle, const SacnRecvMergedData &merged_data)=0
	Notify that a new data packet has been received and merged.

virtual void	HandleNonDmxData (Handle receiver_handle, const etcpal::SockAddr &source_addr, const SacnRemoteSource &source_info, const SacnRecvUniverseData &universe_data)
	Notify that a non-data packet has been received.

virtual void	HandleSourcesLost (Handle handle, uint16_t universe, const std::vector< SacnLostSource > &lost_sources)
	Notify that one or more sources have entered a source loss state.

virtual void	HandleSamplingPeriodStarted (Handle handle, uint16_t universe)
	Notify that a merge receiver's sampling period has begun.

virtual void	HandleSamplingPeriodEnded (Handle handle, uint16_t universe)
	Notify that a merge receiver's sampling period has ended.

virtual void	HandleSourcePapLost (Handle handle, uint16_t universe, const SacnRemoteSource &source)
	Notify that a source has stopped transmission of per-address priority packets.

virtual void	HandleSourceLimitExceeded (Handle handle, uint16_t universe)
	Notify that more than the configured maximum number of sources are currently sending on the universe being listened to.

Detailed Description

A base class for a class that receives notification callbacks from a sACN merge receiver.

Constructor & Destructor Documentation

◆ NotifyHandler() [1/2]

sacn::MergeReceiver::NotifyHandler::NotifyHandler ( const NotifyHandler & other )

default

Defaulted copy constructor.

Parameters

other Copy source.

◆ NotifyHandler() [2/2]

sacn::MergeReceiver::NotifyHandler::NotifyHandler ( NotifyHandler && other )

default

Defaulted move constructor.

Parameters

other Move source.

Member Function Documentation

◆ HandleMergedData()

virtual void sacn::MergeReceiver::NotifyHandler::HandleMergedData	(	Handle	handle,
		const SacnRecvMergedData &	merged_data )

pure virtual

Notify that a new data packet has been received and merged.

This callback will be called in multiple ways:

When a new non-preview data packet or per-address priority packet is received from the sACN Receiver module, it is immediately and synchronously passed to a DMX Merger. If the sampling period has not ended for the source, the merged result is not passed to this callback until the sampling period ends. Otherwise, it is immediately and synchronously passed to this callback.
When a sACN source is no longer sending non-preview data or per-address priority packets, the lost source callback from the sACN Receiver module will be passed to a merger, after which the merged result is passed to this callback pending the sampling period.

After a networking reset, some of the sources on the universe may not be included in the resulting sampling period. Therefore, expect this to continue to be called during said sampling period.

This callback should be processed quickly, since it will interfere with the receipt and processing of other sACN packets on the universe.

Parameters

[in]	handle	The merge receiver's handle.
[in]	merged_data	The merged data (and relevant information about that data), starting from the first slot of the currently configured footprint. Only sources that are not currently part of a sampling period are part of the merged result.

◆ HandleNonDmxData()

virtual void sacn::MergeReceiver::NotifyHandler::HandleNonDmxData	(	Handle	receiver_handle,
		const etcpal::SockAddr &	source_addr,
		const SacnRemoteSource &	source_info,
		const SacnRecvUniverseData &	universe_data )

inlinevirtual

Notify that a non-data packet has been received.

When an established source sends a sACN data packet that doesn't contain DMX values or priorities, the raw data within the configured footprint is immediately and synchronously passed to this callback.

This callback should be processed quickly, since it will interfere with the receipt and processing of other sACN packets on the universe.

If the source is sending sACN Sync packets, this callback will only be called when the sync packet is received, if the source forces the packet, or if the source sends a data packet without a sync universe. TODO: this version of the sACN library does not support sACN Sync. This paragraph will be valid in the future.

Parameters

[in]	receiver_handle	The merge receiver's handle.
[in]	source_addr	The network address from which the sACN packet originated.
[in]	source_info	Information about the source that sent this data.
[in]	universe_data	The universe data (and relevant information about that data), starting from the first slot of the currently configured footprint.

◆ HandleSamplingPeriodEnded()

virtual void sacn::MergeReceiver::NotifyHandler::HandleSamplingPeriodEnded	(	Handle	handle,
		uint16_t	universe )

inlinevirtual

Notify that a merge receiver's sampling period has ended.

All sources that were included in this sampling period will now officially be included in merged data notifications. If there was a networking reset during this sampling period, another sampling period may have been scheduled, in which case this will be immediately followed by a sampling period started notification.

If there were any active levels received during the sampling period, they were factored into the merged data notification called immediately before this notification. If the merged data notification wasn't called before this notification, that means there currently isn't any active data on the universe.

Parameters

handle	The merge receiver's handle.
universe	The universe the merge receiver is monitoring.

◆ HandleSamplingPeriodStarted()

virtual void sacn::MergeReceiver::NotifyHandler::HandleSamplingPeriodStarted	(	Handle	handle,
		uint16_t	universe )

inlinevirtual

Notify that a merge receiver's sampling period has begun.

If this sampling period was due to a networking reset, some sources may not be included in it. The sources that are not part of the sampling period will continue to be included in merged data notifications.

Parameters

handle	The merge receiver's handle.
universe	The universe the merge receiver is monitoring.

◆ HandleSourceLimitExceeded()

virtual void sacn::MergeReceiver::NotifyHandler::HandleSourceLimitExceeded	(	Handle	handle,
		uint16_t	universe )

inlinevirtual

Notify that more than the configured maximum number of sources are currently sending on the universe being listened to.

This is a notification that is directly forwarded from the sACN Receiver module.

Parameters

[in]	handle	The merge receiver's handle.
[in]	universe	The universe this merge receiver is monitoring.

◆ HandleSourcePapLost()

virtual void sacn::MergeReceiver::NotifyHandler::HandleSourcePapLost	(	Handle	handle,
		uint16_t	universe,
		const SacnRemoteSource &	source )

inlinevirtual

Notify that a source has stopped transmission of per-address priority packets.

Parameters

handle	The merge receiver's handle.
universe	The universe this merge receiver is monitoring.
source	Information about the source that has stopped transmission of per-address priority.

◆ HandleSourcesLost()

virtual void sacn::MergeReceiver::NotifyHandler::HandleSourcesLost	(	Handle	handle,
		uint16_t	universe,
		const std::vector< SacnLostSource > &	lost_sources )

inlinevirtual

Notify that one or more sources have entered a source loss state.

Parameters

handle	The merge receiver's handle.
universe	The universe this merge receiver is monitoring.
lost_sources	Vector of structs describing the source or sources that have been lost.

◆ operator=() [1/2]

NotifyHandler & sacn::MergeReceiver::NotifyHandler::operator= ( const NotifyHandler & other )

default

Defaulted copy assignment operator.

Parameters

other Copy source.

Returns: Reference to this.

◆ operator=() [2/2]

NotifyHandler & sacn::MergeReceiver::NotifyHandler::operator= ( NotifyHandler && other )

default

Defaulted move assignment operator.

Parameters

other Move source.

Returns: Reference to this.

The documentation for this class was generated from the following file:

include/sacn/cpp/merge_receiver.h

Public Member Functions

Detailed Description

Constructor & Destructor Documentation

◆ NotifyHandler() [1/2]

◆ NotifyHandler() [2/2]

Member Function Documentation

◆ HandleMergedData()

◆ HandleNonDmxData()

◆ HandleSamplingPeriodEnded()

◆ HandleSamplingPeriodStarted()

◆ HandleSourceLimitExceeded()

◆ HandleSourcePapLost()

◆ HandleSourcesLost()

◆ operator=() [1/2]

◆ operator=() [2/2]